Central London bicycle workshop
Please note that we only service bikes that were originally bought through Cyclefit.
Barna is one of the most experienced and precise bicycle mechanics in the UK.
Please book your workshop appointment in advance, we are unable to offer on-the-day repairs.
020 7430 0083
Bike Service Tariff
Basic Service £95.00
This service is recommended every three to six months and will keep your bike in good working order and flag any future mechanical issues. (This service is recommended for simpler bikes with mechanical gears and rim brakes).
Your bike is checked for wear and tear and damage.
Recommendations for replacement parts made if they are worn or faulty.
Gears and drivetrain cleaned and adjusted in-situ.
Shimano Di2 or SRAM battery charged
Brakes adjusted and pads and rims/rotors checked.
Tyres inflated and checked for cuts and wear.
New components replaced if required.
The bike will be measured pre-service and position checked against your Cyclefit document and the correct position applied after re-assembly.
Intermediate Service £150.00
This service is recommended every 6 to 12 months to keep your bike in good shape.
Your bike is checked for wear and tear and damage. The bike is cleaned and lubricated.
The drivetrain (Chain, front and rear derailleur and chainset) is removed and cleaned and the gears tuned.
Chain and cassette are replaced if they are worn.
Shimano Di2 battery charged, Di2 diagnostic check, software updated.
Disc rotors cleaned and disc pads replaced if needed.
Hydraulic brakes checked and bled.
Rim brake pads checked and brakes adjusted
Tyres checked for cuts and wear, removed form the wheels and tubeless sealant replaced
New components replaced if required.
The bike will be measured pre-service and position checked against your Cyclefit document and correct position applied after re-assembly.
Full Service £225.00
This service is recommended every 12 months to keep your bike in its best possible condition.
Your bike is completely disassembled to its components parts, cleaned, checked for wear and tear and reassembled fully lubricated and reassembled using the correct torque settings.
Worn or faulty components are replaced.
Bottom bracket, headset and wheel bearings removed checked and lubricated.
Shimano Di2 battery charged, Di2 diagnostic check, software updated.
Disc rotors cleaned and disc pads replaced if needed.
Hydraulic brake oil replaced.
Rim brake pads checked and brakes adjusted
Tyres checked for cuts and wear, removed form the wheels and tubeless sealant replaced
Pedal cleats checked for wear and replaced if required.
The bike will be measured pre-service and position checked against your Cyclefit document and correct position applied after re-assembly.
£95.00 Hourly Rate
Please Note:
Cyclefit specialises in high-end bicycles and only has spare parts for bikes equipped with:
Shimano Ultegra mechanical and Di2 gears, Shimano Dura Ace Di2 gears.
Shimano XT and above.
SRAM Rival, Force and Red AXS components
Campagnolo Record and above.