LANDRACE x Sturdy Cycles Collab

UK made titanium components by Tom Sturdy

IMG 4709 resized

We have teamed up with Sturdy Cycles and put together a wonderful LANDRACE Tupelo build with a selection Tom Sturdy's hand made titanium components.
Sturdy Cycles workshop is in Frome, Somerset and Tom is renowned for his 3D printed road and gravel frames.

We are very pleased to be working with a UK based manufacturer.

This build includes a CNC machined titanium stem that is compatible with the Chris King Aeroset 3 headset and runs the brake hose internally. It is a similar to the Enve In-riute stem. Combined with titanium spacers this is a very neat looking addition. the stem is available in 5mm increments from 80mm to 130mm and 3 different angles: -3, -6 and -9 degrees. the stem in the photos is a -6 degree stem and 110mm long. There is also available a titanium computer mount available that integrates with the stem.

IMG 4712 resized
IMG 4724 resized
IMG 4725 resized

The Sturdy seatpost is a combination of 3D printing and beautifully machined components, it is available in a zero setback up to 20mm setback in 5mm increments so the saddle can be clamped in the centre of the rails in its correct fore-aft position. Nice and easy angle adjustments with the two bolt/cradle system.

IMG 4714 resized
Side crop

The CNC'd cranks are a new addition to Tom's product range and are compatible with SRAM chainrings. Available from 150mm to 180mm in 2.5mm increments, now that is interesting; especially if you are using a 3mm shim for a leg length discrepancy. Tom also makes a single titanium chainring if you want a 1x 13 gearing set-up.

IMG 4713 resized
IMG 4722 resized

We had to include the Sturdy Titanium T47 - Enduro XD15 Bottom Bracket to link the titanium cranks to the titanium frame, it looks so good. The Titanium bar end caps are the final flourish.

IMG 4723 resized
IMG 4716 resized

The sizing options of the stem, seatpost and cranks are a bike fitter's dream; helping us fine tune the fit without compromise. We are very much looking forward to getting our LANDRACE bikes out on the road with Tom's beautiful and practical components.

To find out more about this bike and our build options please contact us via our Contact Form below, call the shop or you can pop in to 38 Store Street, to have a look at the bikes.

IMG 4718 resized

£8795.00 LANDRACE X Sturdy Cycles Complete Bike (SRAM Force AXS groupset, LANDRACE x Chris King wheelset)t

£432.00 Sturdy Titanium stem

£75.00 Sturdy Titanium Computer mount

£932.00 Sturdy Machined Titanium Crankset

£360.00 Sturdy Titanium seatpost

£177.00 Sturdy Titanium T47 Bottom Bracket - Enduro XD15

£75.00 Sturdy Titanium Bar End plugs

For more info about this bike please complete the form below

What our clients say

  • "Rode my standard Box Hill loop this morning with the temp shims and more thought to position. Felt more connected and compact on the bike. Fastest ride of the year, picked up close to a km/per hour despite crappy wet pot holed roads, a ton of traffic and a couple of nights out Thu/Fri."

    Matt H

    Seven Evergreen SL

  • "Cyclefit provide a great personalised service that focuses on giving you exactly what you need. They are extremely knowledgable and friendly and no request/requirement is too difficult for them."

    PM

    Cyclist & triathlete

  • "I have a lot of trust in you guys and I know how you work so I think we could do something good. Orthotics feeling good."

    Tom Pidcock

    World and Olympic champion, Ineos Grenadiers.

  • "Honestly these are great (custom orthotics). My feet feel totally balanced and stable and I‘m not searching for the pedal when I want to push it. They’ve made a massive difference.”"

    Tom Pidcock

    Olympic MTB Gold Medallist

  • "A very thorough, professional and personal service. I was keen to analyse my bike position after breaking my hip. The custom footbeds and alterations to my position feel really good, just wish I’d come sooner! Many thanks"

    TD

    Endurance MTB rider